Перейти к основному содержанию

Маршрутизатор Cisco 871 для небольшого офиса

Cisco 871

Интегрированный маршрутизатор (Integrated Serivce Router, ISR) компании Cisco. Снят с производства, но может ещё встречаться сисадминам.

cisco

Компания Cisco рассматривает этот маршрутизатор для работы в:

  • маленьких офисах и удалённых филиалах;
  • сетях малого и среднего бизнеса для обеспечения безопасного Интернет-соединения и построения безопасной беспроводной сети;
  • для сервис-провайдеров, предоставляющих широкополосный и беспроводной доступ своим клиентам.

cisco

Ссылки

https://www.cisco.com/c/en/us/products/collateral/routers/800-series-routers/product_data_sheet0900aecd8028a976.html

Характеристики

  • Общие
    • WAN Interface: 10/100 Mbps Fast Ethernet
    • LAN Interfaces: 4-port 10/100 Mbps managed switch
    • 802.11b/g Option: В серии Cisco 871W
  • Железо
    • Память
      • Default DRAM: 128 MB
      • Maximum DRAM: 128 MB
      • Default Flash Memory: 24 MB (28 MB for Advanced IP Services Feature Set)
      • Maximum Flash Memory: 52 MB
    • Порты
      • WAN: 100 MB Ethernet
      • LAN Switch: Managed 4-port 10/100BASE-T with autosensing MDI/MDX (Media Device In/Media Device Cross Over) for autocrossover
      • 802.11b/g WLANs: опционально
      • Консольный порт: RJ-45
      • USB 2.0 Ports For Advanced Security Features Such as Security Tokens
        • 2 USB 2.0 ports on Cisco 871 only
        • USB 2.0 ports cannot be used for connecting external devices other than those specified for the Cisco 871
    • LEDs: PPP, VPN, ADSL, G.SHDSL, WLAN, LAN
    • Inline PoE: Optional external adapter for inline PoE for IP phones or external wireless access points
    • DSL Specifications
      • ST-Microelectronics 20190 Chipset
      • Supports ADSL over basic telephone service with Annex A and Annex B ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)
      • Supports ADSL over basic telephone service with Annex M (except UK Mask) (extended upstream bandwidth) G.992.3 (ADSL2) and G.992.5 (ADSL2+)
      • G.994.1 ITU G.hs
      • Support for Reach-extended ADSL2 (G.922.3) Annex L
      • Complies with T1.413 ANSI ADSL DMT issue 2
      • DSL Forum TR-067
      • The chipset does not provide interoperability with carrierless amplitude modulation/phase modulation (CAP)-based ADSL lines
      • Annex A and Annex B are supported starting with Cisco IOS Software Release 12.4(4)T.
      • Annex M (except UK Mask) is supported starting with the special Cisco IOS Software Release 12.4(11)XJ; and requires the CISCO877-M-K9 or CISCO877W-G-E-M-K9 SKU.
      • The ADSL2 standard (ITU G.992.3) adds new features and functions targeted at improving ADSL performance and interoperability. In addition, the standard adds support for new applications, services, and deployment scenarios. Among the changes are improvements in data rate and reach performance, rate adaptation, improved diagnostics, and power enhancements. The conventional ADSL standard (ITU G.992.1) provides downstream data rates of up to 8 Mbps and upstream data rates of up to 0.8 Mbps, and ADSL2 provides higher downstream rates of up to 12 Mbps and upstream data rates of up to 1 Mbps.
      • The ADSL2+ standard (ITU G.992.5) doubles the bandwidth used for downstream data transmission, effectively doubling the maximum downstream data rates, and achieving downstream data rates of up to 24 Mbps and upstream data rates of up to 1.5 Mbps.
      • Cisco 877-M supports ITU G.992.3 Annex M (except UK Mask), and is optimized for PSD Mask EU-64 M9. Annex M adds capabilities for extended upstream bandwidth above 2.0Mbps. This allows carriers and enterprises to cover applications traditionally served by T1, E1, G.SHDSL without overhauling the transport infrastructure. Exact data rates vary depending on the distance from the DSL access multiplexer (DSLAM), DSLAM type, line card and chipset, and firmware, noise profile, quality of copper, etc. The reach-extended ADSL2 standard (G.992.3)
      • Annex L increases performance on loop lengths greater than 16,000 feet from the Central Office.
    • Размеры и вес
      • В x Ш x Г: 50.8 x 260.4 x 215.9.9 мм
      • Вес: 0.954 кг
    • Питание
      • Внешний БП: 100 - 220 В
      • Частота: 50 - 60 Гц
      • Максимальная выходная мощность: 26 Ватт
      • Выходное напряжение: 5 и 12 В
    • Окружающая среда
      • Рабочая температура: 0 - 40 °C
      • Рабочая влажность: 10 - 85 % без конденсата
      • Рабочая высота: 3000 м
      • Температура хранения: -20 - 65 °C
      • Влажность при хранении: 5 - 95 % без конденсата
      • Высота хранения: 4570 м
  • Cisco IOS Software Features
    • Routing Protocols and General Router Features
      • Routing Information Protocol (RIPv1 and RIPv2)
      • Layer 2 Tunneling Protocol (L2TP)
      • Cisco Express Forwarding (CEF) Port Address Translation (PAT)
      • RFC 1483/2684
      • Point-to-Point Protocol over ATM (PPoA) (DSL models only)
      • PPP over Ethernet (PPPoE)
      • 802.1d Spanning Tree Protocol (STP)
      • Dynamic Host Control Protocol (DHCP) server/relay/client
      • Access control lists (ACLs)
      • Generic routing encapsulation (GRE)
      • Dynamic DNS Support for Cisco IOS
    • Рекомендовано пользователей: 1 - 20
    • DSL and ATM Features (DSL Models Only)
      • ATM Variable Bit Rate/real-time (VBR-rt)
      • ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit Rate/non-real-time (VBR-nrt)
      • ATM Operation, Administration, and Maintenance (OAM) Support for F5 Continuity Check; segment and end-to-end loopback; and Interim Local Management Interface (ILMI) support
      • 10 virtual circuits
    • Security Features
      • Stateful Inspection Firewall
      • Bridging firewall (Cisco 871 only)
      • NAT transparency
      • Firewall support for skinny clients
      • Hardware-accelerated 3DES for IPSec
      • Hardware-accelerated AES for IPSec
      • Cisco Easy VPN Client and Server
      • IPSec 3DES termination/initiation
      • IPSec passthrough
      • Point-to-Point Tunneling Protocol (PPTP) passthrough
      • L2TP passthrough
      • 802.1x
      • Secure HTTP (HTTPS), FTP, and Telnet authentication proxies
      • 10 VPN Tunnels
      • Advanced Application Inspection and Control
      • E-mail Inspection Engine
      • No Service Password Recovery
      • HTTP Inspection Engine
      • System Logging-EAL4 Certification Enhancements
      • Easy VPN Remote Web Based Activation
    • QoS Features
      • Weighted Fair Queuing (WFQ)
      • Class-Based WFQ (CBWFQ)
      • Low-Latency Queuing (LLQ)
      • Class-Based Traffic Shaping (CBTS) (Cisco 871 only)
      • Class-Based Traffic Policing (CBTP) (Cisco 876, 877, and 878 only)
      • Class-Based QoS MIB
      • Prefragment before encryption
      • TX ring adjustment
      • VC bundling
      • Policy-based routing (PBR)
      • Per-VC queuing
      • Per-VC traffic shaping
    • Management Features
      • Cisco SDM
      • Management of LAN switch ports
      • Cisco Configuration Express
      • Cisco Configuration Engine support
      • DSL firmware update from Flash
      • Cisco Service Assurance Agent (SAA)
      • Telnet, Simple Network Management Protocol (SNMPv3), CLI, and HTTP management
      • RADIUS and TACACS+
    • High-Availability Features
      • Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
      • Hot Standby Router Protocol (HSRP)
      • Out-of-band management with external modem through virtual auxiliary port
      • Dial backup with external modem through virtual auxiliary port
      • ISDN S/T port for out-of-band management (Cisco 876 and 878 only)
    • VLAN: Поддержка 2 VLANs с Base Image. Один VLAN выделен для DMZ.
  • Cisco IOS Software Features (Optional Software Upgrade)
    • Routing Protocols
      • Open Shortest Path First (OSPF)
      • Border Gateway Protocol (BGP)
      • Enhanced Interior Gateway Routing Protocol (EIGRP)
    • General Router Features
      • 4 802.1q VLANs on Advanced IP Services IOS image
      • Web Content Caching Protocol (WCCP)
      • Demilitarized Zone (DMZ)
      • ARP-Auto Logoff
    • Security Features
      • Intrusion detection system/intrusion prevention system (IDS/IPS)
      • Dynamic Multipoint VPN (DMVPN) (multipoint GRE and Next Hop Resolution Protocol [NHRP])
      • Tunnel-less Group Encrypted Transport (GET VPN)
      • Lock and Key
      • URL filtering: Websense and N2H2
      • Digital certificates (PKI)
      • Network Admissions Control (NAC)
    • IPv6 Features
      • IPv6 addressing architecture
      • IPv6 name resolution
      • IPv6 statistics
      • IPv6 translation-transport packets between IPv6-only and IPv4-only endpoints
      • ICMPv6
      • IPv6 DHCP
    • QoS Features
      • Priority and custom queuing
      • Class-Based Weighted Random Early Detection (CBWRED)
      • Network-Based Application Recognition (NBAR)
      • Link Fragmentation and Interleaving (LFI)
      • Resource Reservation Protocol (RSVP)
      • RTP Header compression (Real Time Protocol)
      • Differentiated Services (DiffServ)
      • QoS Preclassify & Pre-fragmentation
      • Class-Based Marking (CBM)
    • Multicast Features
      • Protocol Independent Multicast (PIM) Sparse Mode
      • PIM Sparse-Dense Mode
      • Auto Route Processing (Auto-RP)
    • High-Availability Features: Multigroup HSRP (MHSRP)

Фотографии

Вид сверху.

cisco

Вид спереди.

cisco

Порты.

cisco

Вид снизу.

cisco

Наклейка.

cisco

Разъём питания.

cisco

Вилка.

cisco

Блок питания.

cisco

Цены

 

Похожие материалы

Коммутатор Cisco Catalyst 2960 — WS-C2960RX-24PS-L

FlexStack-Plus модуль не поддерживает горячую замену и должен быть установлен в слот FlexStack-Plus заранее. Подключаемые к стеку коммутаторы автоматически обновляют версию stack’s Cisco IOS Software и прозрачно присоединяются к стеку.

Cisco Catalyst C9500-16X — обзор

Cisco Catalyst C9500-16X — это 16-портовый (16 x SFP+) сетевой коммутатор корпоративного класса с модулем аплинка, обеспечивающий высокий уровень сетевой безопасности. Два блока питания hot plug, съёмные вентиляторы.