5.0
2021-10-27T09:39:54Z
Templates
APC Rack PDU SNMP
APC Rack PDU SNMP
Templates
Bank
Device
General
Ident
Phase
Status
-
Bank count
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.7.0
rPDU2BankTableSize.0
{$REQUEST_LONG_PERIOD}
{$INFO_HISTORY_PERIOD}
{$INFO_TRENDS_PERIOD}
The number of connected Rack PDU banks
General
-
Device count
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.3.0
rPDU2DeviceTableSize.0
{$REQUEST_LONG_PERIOD}
{$INFO_HISTORY_PERIOD}
{$INFO_TRENDS_PERIOD}
The total number of Rack PDUs
General
-
Ident count
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.1.0
rPDU2IdentTableSize.0
{$REQUEST_LONG_PERIOD}
{$INFO_HISTORY_PERIOD}
{$INFO_TRENDS_PERIOD}
The total number of Rack PDUs
General
-
Outlet Metered count
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.9.3.0
rPDU2OutletMeteredTableSize.0
{$REQUEST_LONG_PERIOD}
{$INFO_HISTORY_PERIOD}
{$INFO_TRENDS_PERIOD}
The number of metered outlets on connect Rack PDUs
General
-
Outlet Switched count
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.9.1.0
rPDU2OutletSwitchedTableSize.0
{$REQUEST_LONG_PERIOD}
{$INFO_HISTORY_PERIOD}
{$INFO_TRENDS_PERIOD}
The number of switched outlets on connected Rack PDUs
General
-
Phase count
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.5.0
rPDU2PhaseTableSize.0
{$REQUEST_LONG_PERIOD}
{$INFO_HISTORY_PERIOD}
{$INFO_TRENDS_PERIOD}
The number of connected Rack PDU phases
General
-
Sensor Temp Humidity count
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.10.1.0
rPDU2SensorTempHumidityTableSize.0
{$REQUEST_LONG_PERIOD}
{$INFO_HISTORY_PERIOD}
{$INFO_TRENDS_PERIOD}
The number of connected temperature-humidity sensors
General
-
System contact details
SNMP_AGENT
1.3.6.1.2.1.1.4.0
system.contact[sysContact.0]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
MIB: SNMPv2-MIB
The textual identification of the contact person for this managed
node, together with information on how to contact this person. If no contact
information is known, the value is the zero-length string.
CONTACT
General
DISCARD_UNCHANGED_HEARTBEAT
1d
-
System description
SNMP_AGENT
1.3.6.1.2.1.1.1.0
system.descr[sysDescr.0]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
MIB: SNMPv2-MIB
A textual description of the entity. This value should
include the full name and version identification of the system's hardware type, software operating-system, and
networking software.
General
DISCARD_UNCHANGED_HEARTBEAT
1d
-
System location
SNMP_AGENT
1.3.6.1.2.1.1.6.0
system.location[sysLocation.0]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
MIB: SNMPv2-MIB
The physical location of this node (e.g., `telephone closet,
3rd floor'). If the location is unknown, the value is the zero-length string.
LOCATION
General
DISCARD_UNCHANGED_HEARTBEAT
1d
-
System name
SNMP_AGENT
1.3.6.1.2.1.1.5.0
system.name[sysName.0]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
MIB: SNMPv2-MIB
An administratively-assigned name for this managed node.By
convention, this is the node's fully-qualified domain name. If the name is unknown,
the value is the zero-length string.
NAME
General
DISCARD_UNCHANGED_HEARTBEAT
1d
-
Uptime
SNMP_AGENT
1.3.6.1.2.1.1.3.0
system.uptime[sysUpTime.0]
{$REQUEST_HOT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
uptime
Status
MULTIPLIER
0.01
{last()}<10m
{HOST.NAME} has been restarted (uptime < 10m)
WARNING
Uptime is less than 10 minutes
YES
No SNMP data collection
{APC Rack PDU SNMP:zabbix[host,snmp,available].max({$SNMP.TIMEOUT})}=0
-
SNMP agent availability
INTERNAL
zabbix[host,snmp,available]
{$REQUEST_SHORT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
Status
zabbix.host.available
DISCARD_UNCHANGED_HEARTBEAT
6h
{max({$SNMP.TIMEOUT})}=0
No SNMP data collection
Current state: {ITEM.LASTVALUE1}
WARNING
SNMP is not available for polling. Please check device connectivity and SNMP settings.
Bank
SNMP_AGENT
discovery[{#SNMPVALUE},.1.3.6.1.4.1.318.1.1.26.8.3.1.1]
rPDU2Bank
{$DISCOVERY_PERIOD}
Bank {#SNMPINDEX} current
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.8.3.1.5.{#SNMPINDEX}
rPDU2BankCurrent[{#SNMPINDEX}]
{$REQUEST_SHORT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
FLOAT
A
Indicates the current draw, in tenths of Amps, of the load on the Rack PDU bank being queried
Bank
MULTIPLIER
0.1
Bank {#SNMPINDEX} load state
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.8.3.1.4.{#SNMPINDEX}
rPDU2BankStatusLoadState[{#SNMPINDEX}]
{$REQUEST_HOT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
Indicates the present load status of the Rack PDU bank being queried
Bank
APC Status Load State
{nodata({$NODATA_PERIOD})}=1
{HOST.NAME}: Bank {#SNMPINDEX} has no data {$NODATA_PERIOD} (HW)
HIGH
{last()}<>2
{HOST.NAME}: Bank {#SNMPINDEX} load state is {ITEM.LASTVALUE} (HW)
AVERAGE
{HOST.NAME}: Bank {#SNMPINDEX} has no data {$NODATA_PERIOD} (HW)
{APC Rack PDU SNMP:rPDU2BankStatusLoadState[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1
Bank {#SNMPINDEX} current
1
1A7C11
-
APC Rack PDU SNMP
rPDU2BankCurrent[{#SNMPINDEX}]
Device
SNMP_AGENT
discovery[{#SNMPVALUE},.1.3.6.1.4.1.318.1.1.26.4.3.1.1]
rPDU2Device
{$DISCOVERY_PERIOD}
Device {#SNMPINDEX} max current rating
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.2.1.9.{#SNMPINDEX}
rPDU2DevicePropertiesMaxCurrentRating[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
FLOAT
A
The maximum current rating, measured in Amps, for the Rack PDU
Device
Device {#SNMPINDEX} max phase current rating
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.2.1.12.{#SNMPINDEX}
rPDU2DevicePropertiesMaxPhaseCurrentRating[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
FLOAT
A
The maximum current rating, measured in Amps, for the Rack PDU
Device
Device {#SNMPINDEX} energy start time
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.10.{#SNMPINDEX}
rPDU2DeviceStatusEnergyStartTime[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
Indicates the date and time of the last device energy meter reset
Device
Device {#SNMPINDEX} energy
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.9.{#SNMPINDEX}
rPDU2DeviceStatusEnergy[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
FLOAT
Wh
A user resettable energy meter measuring Rack PDU load energy consumption in tenths of kilowatt-hours
Device
MULTIPLIER
100
Device {#SNMPINDEX} load state
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.4.{#SNMPINDEX}
rPDU2DeviceStatusLoadState[{#SNMPINDEX}]
{$REQUEST_HOT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
Indicates the present load status of the Rack PDU
Device
APC Status Load State
{last()}<>2
{HOST.NAME}: Device {#SNMPINDEX} load state is {ITEM.LASTVALUE} (HW)
AVERAGE
{HOST.NAME}: Device {#SNMPINDEX} has no data {$NODATA_PERIOD} (HW)
{APC Rack PDU SNMP:rPDU2DeviceStatusLoadState[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply1Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply2Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupplyAlarm[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1
Device {#SNMPINDEX} name
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.3.{#SNMPINDEX}
rPDU2DeviceStatusName[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
A user-defined string identifying the Rack PDU
Device
Device {#SNMPINDEX} outlets energy start time
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.15.{#SNMPINDEX}
rPDU2DeviceStatusOutletsEnergyStartTime[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
Indicates the date and time of the last outlets energy meter reset
Device
Device {#SNMPINDEX} peak power start time
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.8.{#SNMPINDEX}
rPDU2DeviceStatusPeakPowerStartTime[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
Indicates the date and time of the last device peak power reset
Device
Device {#SNMPINDEX} peak power timestamp
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.7.{#SNMPINDEX}
rPDU2DeviceStatusPeakPowerTimestamp[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
Indicates the date and time that peak power consumption occurred
Device
Device {#SNMPINDEX} peak power
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.6.{#SNMPINDEX}
rPDU2DeviceStatusPeakPower[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
FLOAT
W
The peak power consumption of the Rack PDU load in hundredths of kilowatts
Device
MULTIPLIER
10
Device {#SNMPINDEX} power supply 1 status
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.13.{#SNMPINDEX}
rPDU2DeviceStatusPowerSupply1Status[{#SNMPINDEX}]
{$REQUEST_HOT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
Indicates whether or not an alarm is active in Power Supply 1
Device
APC Power Supply Status
{last()}=2
{HOST.NAME}: Device {#SNMPINDEX} power supply 1 alarm (HW)
AVERAGE
{HOST.NAME}: Device {#SNMPINDEX} has no data {$NODATA_PERIOD} (HW)
{APC Rack PDU SNMP:rPDU2DeviceStatusLoadState[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply1Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply2Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupplyAlarm[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1
Device {#SNMPINDEX} power supply 2 status
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.14.{#SNMPINDEX}
rPDU2DeviceStatusPowerSupply2Status[{#SNMPINDEX}]
{$REQUEST_HOT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
Indicates whether or not an alarm is active in Power Supply 2
Device
APC Power Supply Status
{last()}=2
{HOST.NAME}: Device {#SNMPINDEX} power supply 2 alarm (HW)
AVERAGE
{HOST.NAME}: Device {#SNMPINDEX} has no data {$NODATA_PERIOD} (HW)
{APC Rack PDU SNMP:rPDU2DeviceStatusLoadState[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply1Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply2Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupplyAlarm[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1
Device {#SNMPINDEX} power supply alarm
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.12.{#SNMPINDEX}
rPDU2DeviceStatusPowerSupplyAlarm[{#SNMPINDEX}]
{$REQUEST_HOT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
Indicates a power supply alarm is active when value equals alarm (2)
normal (1),
alarm (2)
Device
APC Device Status Alarm
{last()}<>1
{HOST.NAME}: Device {#SNMPINDEX} power supply alarm (HW)
AVERAGE
{HOST.NAME}: Device {#SNMPINDEX} has no data {$NODATA_PERIOD} (HW)
{APC Rack PDU SNMP:rPDU2DeviceStatusLoadState[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply1Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply2Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupplyAlarm[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1
Device {#SNMPINDEX} power
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.4.3.1.5.{#SNMPINDEX}
rPDU2DeviceStatusPower[{#SNMPINDEX}]
{$REQUEST_SHORT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
FLOAT
W
The power consumption of the Rack PDU load in hundredths of kilowatts
Device
MULTIPLIER
10
{APC Rack PDU SNMP:rPDU2DeviceStatusLoadState[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply1Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupply2Status[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1 or {APC Rack PDU SNMP:rPDU2DeviceStatusPowerSupplyAlarm[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1
{HOST.NAME}: Device {#SNMPINDEX} has no data {$NODATA_PERIOD} (HW)
HIGH
Device {#SNMPINDEX} power
1
1A7C11
-
APC Rack PDU SNMP
rPDU2DeviceStatusPower[{#SNMPINDEX}]
Ident
SNMP_AGENT
discovery[{#SNMPVALUE},.1.3.6.1.4.1.318.1.1.26.2.1.1]
rPDU2Ident
{$DISCOVERY_PERIOD}
Ident {#SNMPINDEX} contact
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.2.1.10.{#SNMPINDEX}
rPDU2IdentContact[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
DISABLED
NO_DISCOVER
CHAR
A user-defined string identifying the person to contact regarding the Rack PDU
Ident
Ident {#SNMPINDEX} date of manufacture
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.2.1.7.{#SNMPINDEX}
rPDU2IdentDateOfManufacture[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
The date the Rack PDU was manufactured in mm/dd/yyyy format
Ident
Ident {#SNMPINDEX} firmware rev
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.2.1.6.{#SNMPINDEX}
rPDU2IdentFirmwareRev[{#SNMPINDEX}]
{$REQUEST_MIDDLE_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
The Rack PDU firware version
Ident
{diff()}=1 and {strlen()}>0
{HOST.NAME}: Ident {#SNMPINDEX} firmware was changed
INFO
Ident {#SNMPINDEX} hardware rev
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.2.1.5.{#SNMPINDEX}
rPDU2IdentHardwareRev[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
The Rack PDU hardware version
Ident
Ident {#SNMPINDEX} location
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.2.1.4.{#SNMPINDEX}
rPDU2IdentLocation[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
A user-defined string identifying the location of the Rack PDU
Ident
Ident {#SNMPINDEX} model number
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.2.1.8.{#SNMPINDEX}
rPDU2IdentModelNumber[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
The Rack PDU model number
Ident
Ident {#SNMPINDEX} name
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.2.1.3.{#SNMPINDEX}
rPDU2IdentName[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
A user-defined string identifying the Rack PDU
Ident
Ident {#SNMPINDEX} serial number
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.2.1.9.{#SNMPINDEX}
rPDU2IdentSerialNumber[{#SNMPINDEX}]
{$REQUEST_LONG_PERIOD}
{$HISTORY_PERIOD}
0
CHAR
The Rack PDU serial number
Ident
Phase
SNMP_AGENT
discovery[{#SNMPVALUE},.1.3.6.1.4.1.318.1.1.26.6.3.1.1]
rPDU2Phase
{$DISCOVERY_PERIOD}
Phase L{#SNMPINDEX} current
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.6.3.1.5.{#SNMPINDEX}
rPDU2PhaseCurrent[{#SNMPINDEX}]
{$REQUEST_SHORT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
FLOAT
A
Indicates the current draw, in tenths of Amps, of the load on the Rack PDU phase being queried
Phase
MULTIPLIER
0.1
Phase L{#SNMPINDEX} load state
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.6.3.1.4.{#SNMPINDEX}
rPDU2PhaseLoadState[{#SNMPINDEX}]
{$REQUEST_HOT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
Indicates the present load status of the Rack PDU phase being queried
Phase
APC Status Load State
{nodata({$NODATA_PERIOD})}=1
{HOST.NAME}: Phase L{#SNMPINDEX} has no data {$NODATA_PERIOD} (HW)
HIGH
{last()}<>2
{HOST.NAME}: Phase L{#SNMPINDEX} load state is {ITEM.LASTVALUE} (HW)
AVERAGE
{HOST.NAME}: Phase L{#SNMPINDEX} has no data {$NODATA_PERIOD} (HW)
{APC Rack PDU SNMP:rPDU2PhaseLoadState[{#SNMPINDEX}].nodata({$NODATA_PERIOD})}=1
Phase L{#SNMPINDEX} power
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.6.3.1.7.{#SNMPINDEX}
rPDU2PhasePower[{#SNMPINDEX}]
{$REQUEST_SHORT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
FLOAT
W
Indicates the load power, in hundredths of kilowatts, consumed on the Rack PDU phase being queried
Phase
MULTIPLIER
10
Phase L{#SNMPINDEX} voltage
SNMP_AGENT
.1.3.6.1.4.1.318.1.1.26.6.3.1.6.{#SNMPINDEX}
rPDU2PhaseVoltage[{#SNMPINDEX}]
{$REQUEST_SHORT_PERIOD}
{$HISTORY_PERIOD}
{$TRENDS_PERIOD}
V
Indicates the Voltage, in Volts, of the Rack PDU phase being queried
Phase
Phase L{#SNMPINDEX} current
1
1A7C11
-
APC Rack PDU SNMP
rPDU2PhaseCurrent[{#SNMPINDEX}]
Phase L{#SNMPINDEX} power
1
1A7C11
-
APC Rack PDU SNMP
rPDU2PhasePower[{#SNMPINDEX}]
Phase L{#SNMPINDEX} voltage
1
1A7C11
-
APC Rack PDU SNMP
rPDU2PhaseVoltage[{#SNMPINDEX}]
{$DISCOVERY_PERIOD}
1h
1h
{$HISTORY_PERIOD}
90d
{$NODATA_PERIOD}
10m
10m > {$REQUEST_HOT_PERIOD}
{$REQUEST_HOT_PERIOD}
120
120
{$REQUEST_LONG_PERIOD}
1d
1d
{$REQUEST_MIDDLE_PERIOD}
1h
1h
{$REQUEST_SHORT_PERIOD}
300
300
{$SNMP_COMMUNITY}
public
{$TRENDS_PERIOD}
180d
180d
APC Device Status Alarm
1
normal
2
alarm
APC Power Supply Status
1
normal
2
alarm
3
notInstalled
APC Status Load State
1
lowLoad
2
normal
3
nearOverload
4
overload
zabbix.host.available
0
not available
1
available
2
unknown