3.4
2018-10-08T09:42:07Z
Templates
APC Rack ATS
APC Rack ATS
APC Rack Automatic Transfer Switches (rack ATS) provide reliable, redundant rack mount power to single-corded equipment. The rack ATS has dual input power cords supplying power to the connected load. If the primary power source becomes unavailable, the rack ATS will seamlessly source power from the secondary source without interrupting critical loads.
Templates
Hardware info
Power sources
-
Alarm Power Limit
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.4.6.0
atsConfigCurrentLimit
86400
90d
180d
0
3
A
0
0
0
0
The threshold (in Amps) at which an Over Current Alarm will be generated
0
Power sources
-
Name A source
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.3.2.1.6.1
atsInputNameA
86400
7d
0
0
1
0
0
0
0
A name given to a particular input.
0
General
-
Name B source
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.3.2.1.6.2
atsInputNameB
86400
7d
0
0
1
0
0
0
0
A name given to a particular input.
0
General
-
Current output load (Amperes)
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.4.3.1.4.1.1.1
atsOutputCurrent
60
90d
180d
0
0
A
0
0
0
0
The output current in 0.1 amperes drawn by the load on the ATS, or -1 if it's unsupported by this ATS.
0
Power sources
1
0.1
-
Output Voltage
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.4.3.1.3.1.1.1
atsOutputVoltage
60
90d
180d
0
3
V
0
0
0
0
0
Power sources
-
Front panel lock status
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.1.11.0
atsStatusFrontPanel
3600
90d
180d
0
3
0
0
0
0
This variable returns the status of the Source A.
0
General
APC ATS panel lock status
-
Hardware status
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.1.16.0
atsStatusHardwareStatus
60
90d
180d
0
3
0
0
0
0
This variable returns the status of display board hardware.
0
General
Hardware info
APC ATS Source statuses
-
Switch state status
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.1.4.0
atsStatusOverCurrentState
60
90d
180d
0
3
0
0
0
0
This variable returns the output current state of the ATS.
atsOverCurrent(1) indicates that the ATS has exceeded the output
current threshold and will not allow a switch over to the alternate power
source if the current source fails.
atsCurrentOK(2) indicates that the output current is below the
output current threshold.
This OID returns the value of the OID atsOutputPhaseState for the 1U ATS and
OID atsOutputBankState for the 2U ATS.
0
Power sources
APC ATS Switch over current state
-
Power Redundancy state
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.1.3.0
atsStatusRedundancyState
60
90d
180d
0
3
0
0
0
0
This variable returns the current redundancy state of the ATS atsRedundancyLost(1) indicates that the ATS is unable to
switch over to the alternate power source if the current source fails.
atsFullyRedundant(2) indicates that the ATS will switch over to
the alternate power source if the current source fails
0
Power sources
APC ATS Redundancy state
-
Current selected source
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.1.2.0
atsStatusSelectedSource.0
15
90d
180d
0
3
0
0
0
0
This variable returns the current source of power.
0
Power sources
APC ATS Source
-
A Source status
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.1.12.0
atsStatusSourceAStatus
60
90d
180d
0
3
0
0
0
0
This variable returns the status of the Source A.
0
Power sources
APC ATS Source statuses
-
B Source status
1
{$SNMP_COMMUNITY}
SNMPv2-SMI::enterprises.318.1.1.8.5.1.13.0
atsStatusSourceBStatus
60
90d
180d
0
3
0
0
0
0
This variable returns the status of the Source B.
0
Power sources
APC ATS Source statuses
Template SNMP Device
{APC Rack ATS:atsStatusHardwareStatus.last(#3)}=1 or {APC Rack ATS:atsStatusHardwareStatus.nodata(5m)}=1
0
Hardware status of {HOST.NAME} is in failed state
0
0
2
That means there has been board hardware failure, or missing data during last 5 minutes.
0
0
{APC Rack ATS:atsOutputCurrent.last()}>14
0
Output Power is high > 14 A (PDU)
0
0
2
0
0
M1
power
{APC Rack ATS:atsStatusRedundancyState.last(5m)}=1
0
Power redundancy lost {HOST.NAME} (HW)
0
0
3
0
0
{APC Rack ATS:atsStatusSelectedSource.0.diff(0)}=1
0
{HOST.NAME} power source was changed (HW)
0
0
1
Power source was chenged, please check all power sources
0
0
Current output load
900
200
0
100
1
1
0
1
0
0
0
0
0
0
0
0
5
1A7C11
0
2
0
-
APC Rack ATS
atsOutputCurrent
Output Voltage
900
200
0
100
1
1
0
1
0
0
0
0
0
0
0
0
5
2774A4
0
7
0
-
APC Rack ATS
atsOutputVoltage
APC ATS panel lock status
1
locked
2
unlocked
APC ATS Redundancy state
1
Redundancy Lost
2
Fully redundant
APC ATS Source
1
Source A
2
Source B
APC ATS Source statuses
1
fail
2
ok
APC ATS Switch over current state
1
OverCurrent
2
CurrentOK