Configuring SNMP Traps

To receive SNMP traps, perform the following steps:

1.	Stop the Avago SAS SNMP Agent by using the following command:

#/etc/init.d/lsi_mrdsnmpd stop

2.	Edit the /etc/lsi_mrdsnmp/sas/sas_TrapDestination.conf file, and add the IP address:

#################################################

# Agent Service needs the IP addresses to sent trap

# Specify the trap destination in this file or in the snmpd.conf file.

# Set the following indicators in "TrapDestInd" to instruct the agent to

# pick the IPs as the destination.

# 1 - IPs only from the snmpd.conf file

# 2 - IPs from this file only

# 3 - IPs from both files

#################################################

TrapDestInd 2

############# Trap Destination IP ##################

127.0.0.1 public

172.28.157.149 public

#################################################

3.	Start the Avago SAS SNMP Agent by entering the following command:

#/etc/init.d/lsi_mrdsnmpd start