Prerequisites to Running MegaRAID Storage Manager Remote Administration The MegaRAID Storage Manager software requires ports 3071 and 5571 to be open to function. Follow these steps to prepare to run the MegaRAID Storage Manager Remote Administration. 1. Configure the system with a valid IP address. Make sure the IP address does not conflict with another in the sub network. Ports, such as 3071 and 5571, are open and available for the MegaRAID Storage Manager framework communication. 2. Disable all security manager and firewall. 3. Configure the multicasting. Make sure Class D multicast IP addresses are registered (at least 229.111.112.12 should be registered for the MegaRAID Storage Manager software to work); if not, create a static route using the following command: Route add 229.111.112.12 dev eth1 4. Install the MegaRAID Storage Manager software. If the MegaRAID Storage Manager software is already installed, restart the MegaRAID Storage Manager Framework.
Prerequisites to Running MegaRAID Storage Manager Remote Administration
The MegaRAID Storage Manager software requires ports 3071 and 5571 to be open to function. Follow these steps to prepare to run the MegaRAID Storage Manager Remote Administration.
1.
Configure the system with a valid IP address.
Make sure the IP address does not conflict with another in the sub network.
Ports, such as 3071 and 5571, are open and available for the MegaRAID Storage Manager framework communication.
2.
Disable all security manager and firewall.
3.
Configure the multicasting.
Make sure Class D multicast IP addresses are registered (at least 229.111.112.12 should be registered for the MegaRAID Storage Manager software to work); if not, create a static route using the following command:
Route add 229.111.112.12 dev eth1
4.
Install the MegaRAID Storage Manager software.
If the MegaRAID Storage Manager software is already installed, restart the MegaRAID Storage Manager Framework.