Solidigm Storage Tool — управление дисками Intel и Solidigm

Олег

11 января 2023

Драйвера и утилиты, а также софт для работы с SSD NVMe дисками Intel и Solidigm теперь можно брать с сайта Solidigm.

https://www.solidigm.com/support-page/drivers-downloads.html

Краткая история: Intel продаёт свой NAND и SSD бизнес компании SK hynix. Те же, в свою очередь, создают новую дочернюю компанию Solidigm для управления производством твердотельных накопителей. Ожидается, что окончательное закрытие сделки произойдет в марте 2025 года, так что драйвера теперь можно искать на solidgm.com.

Инструмент Solidigm Storage Tool, также называемый SST, позволяет управлять твердотельными накопителями Solidigm и Intel. Для ОС Windows существует графический интерфейс пользователя (GUI). Для Windows, Linux и ESXi существует интерфейс командной строки (CLI). Утилита умеет:

Отображать информацию о диске
Показывать состояние диска
Выводить атрибуты SMART
Обновлять прошивку диска
Проводить диагностическое сканирование диска
Производить безопасное стирание диска

Установка SST

Дистрибутив SST ищем тут:

https://www.solidigm.com/content/solidigm/us/en/support-page/drivers-downloads/ka-00085.html

sst

Для работы CLI установка не требуется, покажем на примере GUI в Windows. Предварительно нужно установить драйвер для диска (для CLI тоже):

https://www.solidigm.com/content/solidigm/us/en/support-page/drivers-downloads/ka-00095.html

Драйвер Intel PCIe NVMe SSD для Windows

После установки драйвера перезагружаем компьютер. Устройство определяется (у меня диск серии Intel SSD DC P4500 Series).

intel

Распаковываем архив с утилитой SST.

sst

Запускаем инсталлятор Solidigm_Storage_Tool_1.3.208.exe.

sst

Надпись Advanced Installer в правом верхнем углу говорит нам о том, что установочный пакет не обычный, а продвинутый. Гордимся тем, что удалось достать продвинутый пакет, несмотря на то, что другого нет. Заканчиваем гордиться. Мы в разделе Welcome. Next.

sst

Идёт подготовка к установке. Для работы GUI нужен .NET Framework 4.8. Он у меня уже установлен, но инсталлятор, по идее, должен предложить установку .Net, если Framework не будет найден.

Начинается установка.

sst

Установка завершена, можно после окончания установки запустить SST GUI. Finish.

Solidigm Storage Tool GUI

Открывается окно SST. В разделе Management → Summary отображается краткая информация обо всех найденных утилитой дисках в системе, включая виртуальные, HDD, SSD и NVMe.

sst

Утилита отображает (с ошибками, у HDD вместо производителя указан протокол):

Название диска
Модель
Серийный номер
Версия прошивки
Производитель
Протокол
Версия драйвера
Контроллер
Разделы
Объём и степень использования
Состояние диска
Состояние сенсора температуры
Ожидаемое время жизни (для SSD)

sst

В разделе Diagnostic Scan можно выполнить диагностическое сканирование.

sst

Для удобства можно включить русский язык.

sst

В разделе Firmware Update можно обновить прошивку SSD.

sst

В разделе Secure Erase — безопасное стирание данных. В Details → SMART можно посмотреть данные SMART.

Solidigm Storage Tool CLI

После установки GUI в системе появляется новая команда sst. Пример использования:

sst show -ssd

sst

Исполняемый файл:

C:\Program Files\Solidigm\Solidigm(TM) Storage Tool\sst.exe

Подробная помощь:

sst help

Usage:  sst <verb>[<options>][<targets>][<properties>]

Commands:
AggregationThreshold:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) AggregationThreshold = (value)
AggregationTime:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) AggregationTime = (value)
AssertLog:
    dump [-help|-h] [-destination (path)] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -assertlog
ATASecureErase:
    start [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd (Index|SerialNumber|PhysicalPath)] -secureerase
AttachNamespace:
    attach [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -namespace (namespace id) [-nvmecontroller (controller ID integer)]
BackgroundProcessing:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -backgroundprocessing
BridgeNlog:
    dump [-help|-h] [-destination (path)] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -bridgenlog
ClearCounter:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -PCIeCorrectable ClearCounter = ((true))
ClearHistory:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -FirmwareHistory ClearHistory = ((true))
CreateNamespace:
    create [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -namespace Size = (blocks) [Capacity = (blocks)] [LBAFormat = (0-NumLBAFormats)] [ProtectionInformation = (0|1|2|3)]
    [MultiPathIoCapabilities = (0|1)]
Delete:
    delete [-help|-h] [-force|-f] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath)
DeleteNamespace:
    delete [-help|-h] [-force|-f] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -namespace (namespace id)
DetachNamespace:
    detach [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -namespace (namespace id) [-nvmecontroller (controller ID integer)]
DIPM:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) DIPMEnabled = ('true'|'false')
DriveSelfTestShow:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -selftest
DriveSelfTestStart:
    start [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -selftest [('short'|'extended'|'conveyance')] [-mode (captive|offline)]
DumpIdentifyController:
    dump [-help|-h] -destination (path) [-output|-o (text|nvmxml|json)] [-ssd (Index|SerialNumber|PhysicalPath)] -identify -nvmecontroller
DumpIdentifyControllerList:
    dump [-help|-h] -destination (path) [-output|-o (text|nvmxml|json)] [-ssd (Index|SerialNumber|PhysicalPath)] [-namespace (namespace id)] -nvmecontroller
DumpIdentifyDevice:
    dump [-help|-h] -destination (path) [-output|-o (text|nvmxml|json)] [-ssd (Index|SerialNumber|PhysicalPath)] -identify
DumpIdentifyNamespace:
    dump [-help|-h] -destination (path) [-output|-o (text|nvmxml|json)] [-ssd (Index|SerialNumber|PhysicalPath)] -identify -namespace (namespace id)
DumpIdentifyNamespaceIdDescriptorList:
    dump [-help|-h] -destination (path) [-output|-o (text|nvmxml|json)] [-ssd (Index|SerialNumber|PhysicalPath)] -identify -descriptors [-namespace (integer | 'attached' | 'allocated')]
DumpIdentifyNamespaceList:
    dump [-help|-h] -destination (path) [-output|-o (text|nvmxml|json)] [-ssd (Index|SerialNumber|PhysicalPath)] -namespace (namespace id)
DumpNVMeLog:
    dump [-help|-h] [-destination (path)] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -nvmelog (log name, log ID, or 'list') [NamespaceSpecific = ((true|false))]
    [LogSpecificField = ((int))] [UUIDIndex = ((0-127))] [RetainAsynchronousEvent = ((true|false))] [LogPageOffset = ((int))] [NumDWORDs = ((int))]
DumpSystemSnapshot:
    dump [-help|-h] [-destination (path)] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -SystemSnapshot
eDriveEnabled:
    set [-help|-h] [-force|-f] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) EDriveSupported = ('true')
EnableLog:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -system EnableLog = ('true'|'false')
EnableLSIAdapter:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -system EnableLSIAdapter = ('true'|'false')
EnduranceAnalyzer:
    reset [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -enduranceanalyzer
EventLog:
    dump [-help|-h] [-destination (path)] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -eventlog
FirmwareActivate:
    load [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -firmwareactivate FirmwareSlot = ('1|2|3|4|5|6|7') [CommitAction = (2|3)]
FirmwareActivationNotices:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) FirmwareActivationNoticesConfiguration = ('true'|'false')
FirmwareUpdate:
    load [-help|-h] [-force|-f] [-source (path)] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) [FirmwareSlot = ('1|2|3|4|5|6|7')] [CommitAction = (0|1|2|3)]
GetFeature:
    show [-help|-h] [-display|-d (Property1,...)] [-all|-a] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -getfeature (feature id) [-namespace (namespace id)] [UUIDIndex = ((0-127))]
    [TransferBytes = ((int))] [Select = ('current'|'default'|'saved'|'capabilities')]
HDATemperature:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -hdatemperature
HealthCriticalWarnings:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) SMARTHealthCriticalWarningsConfiguration = (value)
HMCEnabled:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) HMCEnabled = ('true'|'false')
IdentifyController:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -identify -nvmecontroller
IdentifyControllerList:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] [-namespace (namespace id)] -nvmecontroller
IdentifyDevice:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -identify
IdentifyNamespace:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -identify -namespace (namespace id)
IdentifyNamespaceIdDescriptorList:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -identify -descriptors [-namespace (integer | 'attached' | 'allocated')]
IdentifyNamespaceList:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -namespace (namespace id)
IdentifyUUIDList:
    dump [-help|-h] -destination (path) [-output|-o (text|nvmxml|json)] [-ssd (Index|SerialNumber|PhysicalPath)] -identify -uuidlist
IdentifyUUIDList:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -identify -uuidlist
LatencyStatistics:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -latencystatistics ('reads'|'writes') [Type = (0-3)]
LatencyTrackingEnabled:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) LatencyTrackingEnabled = ('true'|'false')
LogFile:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -system LogFile = (file name)
MaximumLBA:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) MaximumLBA = (numGB|1-100%|LBA|'native')
NamespaceAttributeNotices:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) NamespaceAttributeNoticesConfiguration = ('true'|'false')
NcqSupport:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -ncqsupport IsEnabled = ('true'|'false')
Nlog:
    dump [-help|-h] [-destination (path)] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -nlog
NVMeFormat:
    start [-help|-h] [-force|-f] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -nvmeformat [-namespace (namespace id)] [LBAFormat = (0-NumLBAFormats)] [SecureEraseSetting = (0|1|2)]
    [ProtectionInformation = (0|1|2|3)] [ProtectionInformationLocation = (0|1)] [MetadataSettings = (0|1)]
NVMeReset:
    reset [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -nvmecontroller
ParsePersistentEventLog:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -persistenteventlog
Performance:
    show [-help|-h] [-display|-d (Property1,...)] [-all|-a] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -performance
PerformanceBoosterShow:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -performancebooster
PerformanceBoosterStart:
    start [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -performancebooster
PerformanceBoosterStop:
    stop [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -performancebooster
PersistentEventLog:
    dump [-help|-h] [-destination (path)] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -persistenteventlog
PhyConfig:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) PhyConfig = (0|1|2|3)
PhyCounters:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -phycounters
PhysicalSectorSize:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) PhysicalSectorSize = (512|4096)
PhySpeed:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) PhySpeed = (1.5|3|6)
PLITestTimeInterval:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) PLITestTimeInterval = (0-6)
PowerGovernorMode:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) PowerGovernorMode = (0|1|2)
PSIDRevert:
    start [-help|-h] [-force|-f] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -psidrevert (psid)
ReadErrorRecoveryTime:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) ReadErrorRecoveryTimer = (value)
Sanitize:
    start [-help|-h] [-force|-f] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -sanitize [(block|crypto|overwrite|exit_failure)] [NoDeallocateAfterSanitize = (true|false)]
    [OverwriteInvertPattern = (true|false)] [OverwritePassCount = (integer)] [AllowUnrestrictedExit = (true|false)] [OverwritePattern = (32-bit hex pattern)] [ReturnImmediately = (true|false)]
SATAGeneralPurposeLog:
    dump [-help|-h] [-destination (path)] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -gpl (log address) [PageNum = [(page #)]] [SectorCount = [(sectors)]]
Scan:
    start [-help|-h] [-output|-o (text|nvmxml|json)] -scan [(DataIntegrity|ReadScan|Logs)] [-ssd [(Index|SerialNumber|PhysicalPath)]] [IncludeOS = (true|false)] [FullScan = (true|false)] [Path = ((drive
    letter))] [DirectoryPath = ((file path))] [IncludeSystemInfo = (true|false)]
Sensors:
    show [-help|-h] [-display|-d (Property1,...)] [-all|-a] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -sensor
SetDSSDPowerState:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -DSSDPowerState DSSDPowerState = (Watts)
SetErrorInjection:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -ErrorInjection [ErrorInjectionEntries = ((tilde separated entry list))] [File = (path to input file)]
SetFeature:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -setfeature (feature id) [-namespace (namespace id)] [UUIDIndex = ((0-127))] [Save = ((true|false))] [DWORD11 = (32 bit
    hex)] [DWORD12 = (32 bit hex)] [DWORD13 = (32 bit hex)] [InputFile = (filename)]
SetIEEESilo:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -IEEESilo Enable = ('true'|'false')
SetLatencyMonitor:
    set [-help|-h] -source (path) [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -LatencyMonitor
SetLED:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -led [IdleState = (on|off)] [DurationBase = (25|50)] [FormatOnMultiplier = (0-15)] [FormatOffMultiplier = (0-15)]
    [IoOffMultiplier = (0-15)] [IoOnMultiplier = (0-15)]
SetPLPCheck:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -PLPCheck PLPCheckInterval = (interval value)
SetReadonlyWriteThroughMode:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -ReadOnlyWriteThrough Mode = (1|2)
SetTimestamp:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -timestamp (value)
ShowDSSDPowerState:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -DSSDPowerState [Select = ('current'|'default'|'saved'|'capabilities')]
ShowEnduranceAnalyzer:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -enduranceanalyzer
ShowErrorInjection:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -ErrorInjection
ShowIEEESilo:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -IEEESilo [Select = ('current'|'default'|'saved'|'capabilities')]
ShowLED:
    show [-help|-h] [-display|-d (Property1,...)] [-all|-a] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -led
ShowNVMeLog:
    show [-help|-h] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -nvmelog [(log name, log ID, or 'list')] [NamespaceSpecific = ((true|false))] [LogSpecificField = ((int))]
    [UUIDIndex = ((0-127))] [RetainAsynchronousEvent = ((true|false))] [LogPageOffset = ((int))] [NumDWORDs = ((int))]
ShowPartitionInfo:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -partition [(id)] -ssd [(Index|SerialNumber|PhysicalPath)]
ShowPLPCheck:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -PLPCheck [Select = ('current'|'default'|'saved'|'capabilities')]
ShowReadonlyWriteThroughMode:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -ReadOnlyWriteThrough [Select = ('current'|'default'|'saved'|'capabilities')]
ShowTimestamp:
    show [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -timestamp
SMART:
    show [-help|-h] [-display|-d (Property1,...)] [-all|-a] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -smart [(id)] [IncludeNVMeSmartHealthLog = (true|false)]
SMBusAddress:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) SMBusAddress = (address) [SMBusSelector = (selector)]
SolidigmSSD:
    show [-help|-h] [-display|-d (Property1,...)] [-all|-a] [-output|-o (text|nvmxml|json)] -ssd [(Index|SerialNumber|PhysicalPath)]
SSCEnabled:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) SSCEnabled = ('true'|'false')
Standby:
    start [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -standby
System:
    show [-help|-h] [-display|-d (Property1,...)] [-output|-o (text|nvmxml|json)] -system
TelemetryLogDump:
    dump [-help|-h] [-destination (path)] [-dataarea (1-3)] [-output|-o (text|nvmxml|json)] [-ssd [(Index|SerialNumber|PhysicalPath)]] -telemetrylog [HostInitiated = (true|false)] [RetainAsynchronousEvent =
    ((true|false))]
TelemetryLogNotices:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) TelemetryLogNoticesConfiguration = ('true'|'false')
TemperatureLoggingInterval:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) TemperatureLoggingInterval = (time)
TempThreshold:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) TempThreshold = (value)
Trim:
    start [-help|-h] [-force|-f] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -trim StartLBA = (integer) Count = (integer)
Version:
    version [-all|-a] [-display|-d (Property1,...)] [-help|-h] [-output|-o (text|nvmxml|json)]
WriteCache:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) WriteCacheEnabled = ('true'|'false')
WriteCacheReorderingState:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) WriteCacheReorderingStateEnabled = ('true'|'false')
WriteCacheState:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) WriteCacheState = (1|2|3)
WriteErrorRecoveryTime:
    set [-help|-h] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) WriteErrorRecoveryTimer = (value)
WriteSame:
    start [-help|-h] [-force|-f] [-output|-o (text|nvmxml|json)] -ssd (Index|SerialNumber|PhysicalPath) -writesame [Count = (sectors)] [HexPattern = (0x00 - 0xFFFFFFFF)] [LBA = (0-Max LBA)]